Hotel Towel fabric knowledge presentation

Hotel Towel fabric Description: toweling refers textile towel tissue forming loops. It has a dense, soft terry, good moisture, heat insulation, heat resistance and other properties.

Hotel Towel fabric use can be divided into: hand towel, washcloth, towels, towels, pillow covers, towels and towels and other fabrics;

Hotels terry toweling press distribution can be divided into: single-sided and double-sided fluff fluff;

Hotel Towel fabric can be divided according to the different production processes: the first weaving bleaching and weaving after the first bleaching;

Hotel towel fabric according to production can be divided into: plain, color, printing, secant, plain weave, jacquard, section profile, helix and the like.

Hotel with a towel mainly in cotton fiber spun yarn woven into a fine system, its advantages are: good water absorption, soft, three-dimensional sense and so on. There are commonly used yarn 21S, 16S and yarn 21S / 2,32S / 2,40S / 2 double-strand lines (generally spiral products using yarn 16S single system). Count refers to the moisture regain (8.5%), the number of meters per gram of yarn length, the higher the count, the finer the yarn.

Toweling technical requirements are divided into intrinsic quality and appearance quality in two ways. Intrinsic quality including weft density, weight, breaking strength, color fastness and water absorption; visual quality including line block, strip, disseminated, damaged, dyeing, finishing and other defects.

According to the national standard, towels breaking strength: warp greater than 220N zonal greater than 178N. I towel warp breaking strength of up to 350 Newton, zonal strength up to 300 N, 59% respectively, higher than the national standard, 68%; to pack towels regain not more than 7.5%; length and width limits allowed First Class +4% - 3% (in the product from both sides or ends of the 1/4 measure total length and total width); first-class products allow weight limit of 3% towels, terry class -5%, other -2.5% (except towels outside to play or 10 units); color fastness, color fastness activity including soaping fastness, fastness two kinds of friction should reach 3 or more poles, since the degree should not be less than 4 pole.

Toweling soaping refers to the degree of dyed fabric in soap solution under specified conditions after soaping fading, fading as it includes a very clean white color two. Rubbing fastness refers fade condition by the action of an external force or friction caused by water, divided into dry and wet friction fastness to rubbing two kinds. The former is a friction cloth fabric, white look white situation; the latter with an aqueous 100% friction cloth dyed fabric, white look white situation, generally lower than the wet rubbing fastness dry friction fastness. Cotton fabric hungry test soaping temperature generally boil, while the normal washing temperature between 40 ℃ -60 ℃.

Towel fabric warp density controlled by the reed, reed reed number refers to the number of teeth per two inches inside length, thus reed number, the higher warp density fabric strength increases. Gaomi towel so not only have long life, and feel thick, full pattern, but the weaving efficiency is low, relatively high prices. Usually high-density warp density of not less than 250 / 10cm.